Deutronic Electronic Technology (Shenzhen) Co., Lt

The increasing economic and technical demands on flexibility and reliability rise with the complexity of industrial plants. Due to its retrofittability, the Deutronic D-IBM2900 energy buffer is predestined for use in a wide variety of areas or industries and enables optimization in terms of sustainability thanks to its diverse flexibility and adaptation potential. In addition, it can be used as a backup solution to avoid cycle delays, idle times or downtime in industrial environments. In this way, the use of the product makes a decisive contribution to reducing time, costs and risks – while at the same time increasing performance.

The D-IBM2900 convinces with a capacity of 2900 mAh and can be used mobile as well as stationary. Compatibility with Deutronic DBL three-phase chargers (DBL1200/3W, DBL1600/3W and DBL1800/3W) makes Deutronic your problem solver in the field of decentralized power supply. Ensuring an uninterrupted power supply, it can even be implemented in outdoor areas due to the classification in protection class I and in combination with the corresponding charging trolley. Deutronic offers a convenient overall package. Also for customers with the focus on lean management and continuous improvement, the energy buffer is the ideal solution due to its flexibility.

● Ensuring an uninterrupted power supply in the industrial plant area, with simultaneous downtime reduction

● Backup solution to avoid delays in the industrial environment

● Mobile loading unit enables flexible supply in vehicle fleets or in rework stations

● Flexible use in the context of continuous improvement processes or short-term adaptations

● Autonomous battery system with internal BMS (single cell monitoring) and emergency stop

● Inspection opening for safe separation of battery packs for storage and prevention of deep discharge

● Two redundant safety shutdowns with a 1 kV isolation voltage

● Rugged construction meets protection class I requirements

● Compatibility with Deutronic DBL three-phase chargers (DBL1200/3W, DBL1600/3W and DBL1800/3W)

Modern vehicles include a multitude of electrical and electronical components. Vehicle onboard networks possess more than 100 control devices that have to be powered. The hardware and software is adjusted optimally and individually to the respective application and guarantees the greatest possible amount of security and reliability. Deutronic battery charger have proven their worth a thousand of times and thus have been in use by leading OEMs worldwide for decades. An absolute interconnectivity offers a multitude of possibilities: from real time monitoring or remote control to the downstream analysis and processing of all saved data. This means that the applications are almost limitless.

● Intelligent charger for motor vehicles starter battery (Lead acid / Gel / AGM / VRLA / Lithium-Ion Batteries)

● 100% qualified for motor vehicles on-board electronic system / airbag

● Use as battery charger, power supply and motor vehicles energy supply in buffer mode (support during diagnosis / flash programming), as well as for the initial start-up of a combustion engine (engine first start)

● Extensive protection functions and self-protection functions

● Short circuit and reverse polarity protection

● Protection against defective batteries

● Reliable sparking suppression

● Comfortable menu navigation / charging parameter configurable

● Housing protected against internal pollution

● Built-in communication interface

● Status indication via display and high power LEDs

● Menu navigation: English, French, German, Italian, Spanish

● Wide range of accessories e.g. external visualization of operating state (DBL-SIG-LR remote indicator), mains and charging cable, etc.

● Option: Customized charging parameters

● Option: Operation with low temperature until -40°C

● Option: Regeneration charging for deep discharged batteries

● No inrush current – optimized for use within industrial manufacturing lines
● 100% qualified for motor vehicles on-board electronic system/airbag
● Use as battery charger, power supply and motor vehicles energy supply in buffer mode
● Extensive protection functions and self-protection functions
● Short circuit and reverse polarity protection
● Protection against defective batteries
● Reliable sparking suppression
● Comfortable menu navigation / charging parameter configurable
● Built-in communication interface
● Sealed housing, protected against internal pollution
● Status indication via display and high power LEDs
● Menu navigation: English, French, German, Italian, Spanish
● Wide range of accessories, e.g. ext. visualization of operating state (DBL-SIG-LR remote indicator), mains and charging cable
● Option: Customized charging parameters
● Option: Operation with low temperature until -40°C
● Option: Regeneration charging for deep discharged batteries
● Electrical safety: EN60335, EN60950, UL60950-1, UL1236,EN61046, CSA C22.2 No.60950-1-07
● Utilized and approved by well known automotive manufactures
● Input cable: IEC320 China/Australia
● Output cable: choose from cable list below

● For motor vehicles starter battery (Lead acid / Gel / AGM / VRLA)
● No inrush current – optimized for use within industrial manufacturing lines
● 100% qualified for motor vehicles on-board electronic system / airbag
● Use as battery charger, power supply and motor vehicles energy supply in buffer mode
● Extensive protection functions and self-protection functions
● Short circuit and reverse polarity protection
● Protection against defective batteries
● Reliable sparking suppression
● Comfortable menu navigation / charging parameter configurable
● Built-in communication interface
● Sealed housing, protected against internal pollution
● Status indication via display and high power LEDs
● Menu navigation: English, French, German, Italian, Spanish
● Wide range of accessories, e.g. ext. visualization of operating state (DBL-SIG-LR remote indicator), mains and charging cable  
● Option: Customized charging parameters
● Option: Operation with low temperature until -40°C
● Option: Regeneration charging for deep discharged batteries
● Electrical safety: EN60335, EN60950, UL60950-1, UL1236, EN61046, CSA C22.2 No.60950-1-07
● Utilized and approved by well known automotive manufactures
● Input cable: IEC320 China/Australia
● Output cable: choose from cable list below

● For motor vehicles starter battery (lead acid/Gel/AGM/VRLA batteries
● 100% qualified for motor vehicles on-board electronic system/airbag
● Comfortable menu navigation / charging parameter configurable
● Use as battery charger, power supply and motor vehicles energy supply in buffer mode
● Extensive protection functions and self-protection functions
● Short circuit and reverse polarity protection
● Protection against defective batteries
● Reliable sparking suppression
● Built-in communication interface
● Sealed housing
● Housing version "B": Advantageous for industrial production lines
● Status indication via display and high power LEDs
● Wide range of accessories, e.g. ext. visualization of operating state (DBL-SIG-LR remote indicator), mains and charging cable
● Option: Customized charging parameters
● Option: Battery diagnostic system
● Option: Operation with low temperature until -40°C
● Option: Regeneration charging for deep discharged batteries
● Electrical safety – certifications: EN60335, EN60950, UL60950-1, UL1236, CSA C22.2 No.60950-1-07
● Utilized and approved by well known automotive manufactures
● Input cable: IEC320 China/Australia
● Output cable: choose from cable list below